www.instrument.com - Thursday, May 17, 2012
Printer-friendly version of the page "EDAS-2011M Triac Output"
(URL: http://www.instrument.com/.html)

Ordering Information

to view pricing of EDAS-2006M-1, click here

EDAS-2011M-1 Digital Output (Triac) Module

The EDAS-2011M-1 Digital Output Module provides 12 solid state (triac) outputs capable of switching 2 A at 24 VAC to 240 VAC. This module has power-up initialization hardware allowing users to configure the power-up state of each output. The digital outputs have 500 V channel to channel isolation with one return per channel. The module provides 1500 V input to output isolation.

Click here to request more information about the EDAS CE system

EDAS-2011M-1 Specifications

Parameter	Conditions	Specifications
Relay Output AC Closed Resistance	Contact Closure	12 Triac Outputs 2A @ 24VAC to 250VAC .03 ohm
Isolation	Channel - Channel Input to Output	500V 1500V
Current Consumption	5VDC	200 mA max
Dimensions	Inches mm	4.55D x 5.9H x 1.74W 116D x 150H x 42W
Operating Temperature Range		0 to 60° C^*
^*All specifications are typical at 25° C unless otherwise noted.

Digital Module Overview

EDAS-2002M Digital I/O

This module provides 8 input and 4 output channels. Each channel can be configured with advanced functions, like counter, state-of-change detector, rate and puls generator

EDAS-2004M Digital Input - 4 different models

16 channel digital input module with input levels of 5, 24, 120 or 240 volts

EDAS-2005M Digital Output (FET) - 2 different models

There are two FET digital output modules. Module EDAS-2005M-1 provides 12 digital outputs for 24 volt levels. FET outputs capable of switching to 24 volts or ground (PNP/NPN). Module EDAS-2005M-2 provides 12 digital outputs for 360 volt levels. FET outputs capable of switching to 360 volts or ground (PNP/NPN)

EDAS-2010M Relay Output

12 SPST relay output channels, capable of switching 2A at 240 VAC or 30 VDC

EDAS-2011M Triac Output

12 channels with Triac outputs, capable of switching AC signals up to 2 A with voltage levels from 24 VAC to 250 VAC.

Module Overview

CPU

CPU Modules for the EDAS CE Automation & Control System

Remote Analog I/O - EDASce Analog input module

Analog input modules provide 16 channels each and accept voltage, 4-20 mA and thermocouple signals. Sampling speed up to 200 kHz are ideal for vibration and acoustic applications

Ethernet I/O Data Acquisition: Analog Output Module

Analog output modules provide 8 channels each with +/-10 volts

Digital I/O

A wide range of modules for various voltage ranges, FET or relay output. Special functions: counter, pulse-generator, change-of-state detection; all modules provide channel to channel isolation

Quadrature Decoder, Counter

This 2-channel quadrature decoder and high-speed counter module can be used with shaft encoders or as a high-speed up/down counter

Serial Communication

Serial communication modules provide 4 channels of RS232, with up to 25 serial ports per system

Power Supply

Power supply modules for the EDAS CE offer a wide range of input voltage and auxiliary outputs for additional equipment

EDASce Ordering Information

Pricing for all EDASce hardware and modules