EDAS-2002M Digital I/O

This module provides 8 input and 4 output channels. Each channel can be configured with advanced functions, like counter, state-of-change detector, rate and puls generator

EDAS-2004M Digital Input - 4 different models

16 channel digital input module with input levels of 5, 24, 120 or 240 volts

EDAS-2005M Digital Output (FET) - 2 different models

There are two FET digital output modules. Module EDAS-2005M-1 provides 12 digital outputs for 24 volt levels. FET outputs capable of switching to 24 volts or ground (PNP/NPN). Module EDAS-2005M-2 provides 12 digital outputs for 360 volt levels. FET outputs capable of switching to 360 volts or ground (PNP/NPN)

EDAS-2010M Relay Output

12 SPST relay output channels, capable of switching 2A at 240 VAC or 30 VDC

EDAS-2011M Triac Output

12 channels with Triac outputs, capable of switching AC signals up to 2 A with voltage levels from 24 VAC to 250 VAC.

CPU

CPU Modules for the EDAS CE Automation & Control System

Remote Analog I/O - EDASce Analog input module

Analog input modules provide 16 channels each and accept voltage, 4-20 mA and thermocouple signals. Sampling speed up to 200 kHz are ideal for vibration and acoustic applications

Ethernet I/O Data Acquisition: Analog Output Module

Analog output modules provide 8 channels each with +/-10 volts

Digital I/O

A wide range of modules for various voltage ranges, FET or relay output. Special functions: counter, pulse-generator, change-of-state detection; all modules provide channel to channel isolation

Quadrature Decoder, Counter

This 2-channel quadrature decoder and high-speed counter module can be used with shaft encoders or as a high-speed up/down counter

Serial Communication

Serial communication modules provide 4 channels of RS232, with up to 25 serial ports per system

Power Supply

Power supply modules for the EDAS CE offer a wide range of input voltage and auxiliary outputs for additional equipment